Each “Universe” is made up of 512 unique channels. DMX channel 3 will be available for the next light. Hi David, I just stumbled across your site and wondering if you can help this beginner out with some info!! These channels are packaged in a bundle referred to as a Universe. This can range from adjusting the “levels” on stage lighting dimmers to controlling complex intelligent lighting systems and media servers. Are you interested in DMX, or ever wondered how those cool lights at concerts worked? By: Matt McKay Updated September 15, 2017. Refer to each lighting fixture's documentation to determine how many channels each light requires. The Lighting System. The same goes for any and all receivers set up in the circuit, if another is assigned the same address further along, then the same value will be picked up and the same dimming level assigned to that unit. Hooking up your DMX Control System for programming is a fairly straight forward process depending on the size of the installation. In other words, you can go beyond sound-activated programs and take your show to another level. How to Understand DMX Lighting and Fixtures. Setting up DMX hardware set-up is very simple. You can add a dramatic touch to the newlywed couple’s entrance, coordinated color to the first dance of prom king and queen, or … How to wire DMX lighting systems Application note. The lighting control, “board” or “desk” is the a key part of any stage lighting set up and it is using the lighting desk that an operator is able to control the equipment. In lighting, DMX is everywhere, and it is how our lights get information on what to do from our consoles or software. This number is used by the lighting controller to talk to every fixture independently. If you need more than 512 addresses (called a DMX universe) because you have many lights, then you can use multiple DMX output interfaces. Hey fellow DJ’s, I’m trying to set up my first DMX lighting system and I’m having some trouble controlling the light. I do stage plays. QuickQ software brings simplicity and power to smaller lighting systems with an intuitive interface modeled after smart phones, with icons and gesture support that accelerate the learning process, making it easy even for inexperienced users to set up, program and operate. At its simplest, a lighting system consists of electricity, dimmers, cables, lanterns and a control desk with a connection to the dimmers. You can’t argue with the fact that wireless uplights can save you time since you don’t have to run DMX cable everywhere or find power. Larger systems used more cables, and became harder to navigate. This article was originally called “DMX Stage Lighting Systems – Get Them To Talk” but, apart from being a bit of a lame title, this actually misses the point of the serial DMX signal. In this figure switch 10 is use to set the fixture in stand alone mode, found in the user manual, so this switch must be off to operate the fixture in DMX mode.